AMS Trex Device Communicator overview
•
•
Note
AMS Device Manager will synchronize with as many paired AMS Trex units as are connected to
wireless, and in-range. An Audit Trail entry indicates each pairing, unpairing, and synchronization
with a specific Trex unit.
Related information
2.13.1
Synchronize AMS Trex data to AMS Device Manager
using USB
Prerequisites
CAUTION!
Remove the USB cable from the Trex unit before connecting to a device. Do not use USB
communication in a hazardous area.
AMS Device Manager is licensed to communicate with AMS Trex.
AMS Device Manager is paired with the AMS Trex Device Communicator being
synchronized.
Procedure
1.
2.
2.13.2
Pair an AMS Trex unit with an AMS Device Manager
station
CAUTION!
Remove the USB cable from the Trex unit before connecting to a device.
38
A Trex unit is connected to the AMS Device Manager station by USB OR
A Trex unit wireless radio is on, and is connected to a wireless access point
Synchronize AMS Trex data to AMS Device Manager using USB
Connect the micro-USB end of the cable to the AMS Trex unit.
Connect the USB to the AMS Device Manager station.
AMS Trex begins downloading Audit Trail events to the AMS Device Manager Audit
Trail.
Note
If the AMS Trex unit Wireless is turned on and connected to a network containing the paired
AMS Device Manager station, you do not need to sync using USB. Any data that is new since
the last synchronization will automatically connect and download to the AMS Device Manager
database.
User Guide