Settings - Emerson AMS Trex User Manual

Fieldbus Diagnostics application
3.
5.12

Settings

Within the Fieldbus Diagnostics application, you can change the following settings:
•
•
•
•
•
166
Figure 5-9: Example of noise spectrum
If necessary, tap Reset Peak to clear the peak on the spectrum.
View or hide the minimum, maximum, and average values for each measurement.
View or hide the host and device tags.
Set the number of measurements to average.
Set the minimum and maximum acceptable values for each type of measurement.
This defines the range of values for the measurements labeled GOOD, BAD, and
CHECK on the Fieldbus Diagnostics Overview screen.
Reset all settings in the application to the default values.
User Guide