Transfer A Fieldbus Diagnostics Log File From The Trex Unit To A Pc - Emerson AMS Trex User Manual

Procedure
1.
2.
3.
4.
5.
5.13.4 Transfer a Fieldbus Diagnostics log file from the Trex unit
to a PC
The Trex File Transfer Utility saves files to a default location on your PC. The utility can
transfer one or more files. After the files are transferred to the PC, the files are removed
from the Trex unit.
Procedure
1.
2.
3.
4.
5.
6.
7.
User Guide
On the Fieldbus Diagnostics Overview screen, tap Logging.
The Log Settings screen lists the current file name that is being used.
Check the name listed in the File Name field. If it is the desired file, tap OK.
If the desired file name is not listed, do the following:
a. Tap File Name on the Log Settings screen.
b. Tap File Name.
c. Enter the desired file name, and tap OK.
d. Tap OK.
Ensure Append is selected for the Save Option.
Tap OK.
Close the Fieldbus Diagnostics application on the Trex unit.
Connect the Trex unit to the PC where the Trex File Transfer Utility is installed using a
USB cable.
Open the Trex File Transfer Utility.
The application connects to the Trex unit. The connected Trex unit is listed by its
default name.
Next to Fieldbus Diagnostics Dataset, click Transfer.
The Trex File Transfer Utility creates the folder, if necessary, to save the files and
then transfers the files from the Trex unit to the PC. The Fieldbus Diagnostics file is
removed from the Trex unit.
Click OK.
Click the file directory next to Destination to open the folder and access the
transferred files.
To disconnect the Trex unit, remove the USB cable.
Fieldbus Diagnostics application
173