Mitsubishi Q64AD User Manual page 56

5 UTILITY PACKAGE (SW0D5C-QADU-E)
(2) Explanation of command buttons
Make text file
End setup
Cancel
POINT
The automatic refresh settings are stored in the intelligent function module
parameters. After the automatic refresh settings are written to the CPU module,
they are validated by performing STOP
CPU module, turning the power OFF and then ON, or resetting the CPU module.
The automatic refresh settings cannot be changed from the sequencer program.
However, it is possible to add a process similar to automatic refresh by using the
FROM/TO instructions of the sequence program.
A file containing the screen contents is created in text file
format.
Confirms the setting data and ends the operation.
Cancels the setting data and ends the operation.
RUN
5 - 13
MELSEC-Q
STOP RUN operations for the