Table of Contents
Advertisement
Indesit
Company
H. Circulating Motor & Heater
1.
Remove base access panel as in G).
2.
Release 2 hose clips and hoses.
3.
Ease motor towards front away from mounting
bracket.
4.
Separate motor from heater by twisting in an
anti-clockwise direction.
5.
Important
On reassembly:-
a. Do not reuse the removed hose clips.
Replace with new clips C00196223.
Do NOT overtighten the clips as the clip
may cut into the rubber and cause a leak.
b. Ensure 'O' ring is correctly positioned to
avoid leaks.
I.
Drain Pump
1.
Remove base access panel as in G).
2.
Release drain hose by gently pulling away from pump.
3.
Twist pump motor anti-clockwise to release it from the sump.
4.
Ensure 'o' ring is positioned correctly to avoid leaks.
J.
Pressure Switch
1.
Facing the front of machine remove r/h side
panel as in D).
2.
Using suitable pliers squeeze clip and
release pressure switch.
3.
Disconnect wiring.
K. Overflow Unit
(base float switch)
1.
Facing the front of machine remove
r/h side panel as in D).
2.
Release clip and slide unit from
base frame.
3.
Disconnect wiring.
4.
Float and switch can now be
separated from unit.
Service Manual UK
28 of 39
Hose
Clips
Mounting
Bracket
Clip
English
Hide quick links:
Advertisement
Table of Contents
