Table of Contents
Advertisement
Instructions for use
GB
English, 1
FDYF 11011 STYLE
Contents
Installation, 5-6-7
Connecting the electricity and water supplies
Loading the racks, 9-10
Adjusting the upper rack
Third rack
Start-up and use, 11
Wash cycles, 12
Table of wash cycles
Cutting off the water and electricity supplies
Troubleshooting, 16
Guarantee, 18
DISHWASHER
Advertisement
Table of Contents
Related Manuals for Hotpoint FDYF 11011 STYLE
Summary of Contents for Hotpoint FDYF 11011 STYLE
-
Page 1: Table Of Contents
Connecting the electricity and water supplies Technical data Advice regarding the first wash cycle Description of the appliance, 8 Overall view Control panel FDYF 11011 STYLE Loading the racks, 9-10 Lower rack Upper rack Adjusting the upper rack Third rack... -
Page 2: Product Fiche
Product Fiche Product Fiche HOTPOINT Brand FDYF 11011 Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) 295.0 Energy consumption per year in kWh (2) 1.04 Energy consumption of the standard cleaning cycle in kWh... -
Page 3: Precautions And Safety Advice
Precautions and safety advice • The packaging material should not be used as a toy: The appliance was designed and manufactured in it can become a choking or suffocation hazard. compliance with current international safety standards. The following information has been provided for safety If your family includes children: reasons and should therefore be read carefully. -
Page 4: Recycling & Disposal Information
Recycling & Disposal Information As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality recycled components to keep down customer costs and minimise material wastage. Please dispose of packaging and old appliances carefully. -
Page 5: Positioning And Levelling
‘L’ from the use of non-original spare parts. Electrical Connection Changing the Mains Lead Before inserting the plug into the electrical socket, make sure A lead can be ordered from Hotpoint Service that: UK: 08709 066 066 or Republic of Ireland: 1850 302 220 • the socket is earthed and complies with current regulations; - If you have damaged the existing lead or require a longer one • the socket can withstand the maximum load of the appliance,... -
Page 6: Technical Data
The Company shall not be held responsible for any If the inlet hose is not long enough, contact a specialist incidents that occur if these regulations are not observed. (see After Sales Service) store or an authorised technician The water pressure must be within the values indicated Anti-condensation strip (see Installation). -
Page 7: Advice Regarding The First Wash Cycle
Advice regarding the first wash cycle Ensure the drain hose is securely After the installation, remove the stoppers from the racks and the attached, to prevent it coming away retaining elastic elements from the upper rack, if any. while the machine is in use and Immediately before the first washing, completely fill the salt causing a flood. -
Page 8: Description Of The Appliance
Description of the appliance Overall view Upper rack Upper sprayer arm Tip-up dispensers Rack height adjuster Lower rack Lower sprayer arm Washing filter Salt dispenser Detergent dispenser, rinse-aid dispenser and Active Oxygen device 10. Data plate Control panel Control panel Extra Drying option button Half Load option button Button and Start/Pause indicator light Wash-Cycle Selection buttons button and On-Off/Reset indicator lights... -
Page 9: Loading The Racks
Loading the racks Tips Several dishwasher models are fitted with tip-up sectors Before loading the racks, remove all food residues from the They can be used in a vertical position when arranging dishes crockery and empty liquids from glasses and containers. No or in a horizontal position (lower) to load pans and salad bowls preventive rinsing is needed under running water. -
Page 10: Unsuitable Crockery
Tip-up compartments with adjustable position The upper rack can be adjusted for height based on requirements: The side tip-up compartments can be positioned at three high position to place bulky crockery in the lower rack and low different heights to optimize the arrangement of crockery inside position to make the most of the tip-up compartments/sectors the rack. -
Page 11: Start-Up And Use
Start-up and use Starting the dishwasher Measuring out the detergent A good wash result also depends on the correct amount of 1. Turn the water tap on. detergent being used. Exceeding the stated amount does not 2. Press the ON/OFF button: The ON/OFF indicator light and result in a more effective wash and increases environmental the display light up. -
Page 12: Wash Cycles
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycles Approximate Instructions on wash-cycle selection and detergent which Options duration of... -
Page 13: Special Wash Cycles And Options
Special wash cycles and Options Notes: Extra drying Optimum performance levels when using the “Fast" and "Express To improve the dryness level of the crockery, press 30’” cycles can be achieved by respecting the specified number the EXTRA DRYING button; the indicator light will illuminate. of place settings. If it is pressed again the option will be deselected. A higher temperature during the final rinsing and a longer To reduce consumption, only run the dishwasher when it is full. -
Page 14: Rinse Aid And Refined Salt
Rinse aid and refined salt Only use products which have been specifically designed obtained from the organisation which supplies your household with water. for dishwashers. - Switch on the dishwasher using the ON/OFF button, wait a Do not use table/industrial salt or washing-up liquid. few seconds and switch it off using the ON/OFF button. Hold Follow the instructions given on the packaging. -
Page 15: Care And Maintenance
Care and maintenance Shutting off the water and electricity Cleaning the filters supplies The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. • Turn off the water tap after every wash cycle to avoid leaks. They should be cleaned if you wish to achieve the best results • Always unplug the appliance when cleaning it and when in every wash. -
Page 16: Troubleshooting
Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start or cannot • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the cycle. be controlled. • The appliance has not been plugged in properly. •... -
Page 17: After-Sales Service
After Sales Service After Sales Service Appliance Registration No one is better placed to care for your Hotpoint We want to give you additional benefits of Hotpoint appliance during the course of its working life than ownership. To activate your free 5 year parts guarantee us - the manufacturer. -
Page 18: Guarantee
5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. - Page 20 195113124.01 04/2013 pb - Xerox Fabriano...