User Preferences - Fluke MultiFiber Pro Getting Started Manual
Optical power meter and fiber test kits
Hide thumbs
Also See for MultiFiber Pro:
- User manual (66 pages) ,
- User manual (68 pages) ,
- Product information (57 pages)
Table of Contents
Advertisement
MultiFiber Pro Getting Started Guide
Numeric display for the wavelength.
: When the batteries are low, the low battery icon
flashes.
User Preferences
1
For the meter: Make sure the meter is in power or loss
measurement mode.
For the source: Make sure the source is in signal output
mode.
2
Hold down
3
To change a setting, press
4
To see the next setting, press
5
To save the settings and exit setup mode, hold down
and
for 2.5 seconds.
8
and
Turn the backlight off or on.
The meter and source turn off automatically if
you do not press any keys for the selected period
of minutes.
To disable this function, select the dashes (
together for 2.5 seconds.
. Or press
.
if
shows.
).
Advertisement
Table of Contents
