Source Display Features - Fluke MultiFiber Pro Getting Started Manual

Source Display Features


Modes for the source (to see the menu, hold down
2.5 seconds):

SCAN ALL ON: The source changes the channel
automatically.

SCAN ALL OFF: You press
channel.

AUTO
identifier that a MultiFiber Pro meter can read.

AUTO
wavelength identifier.

MODE 2 kHz: The output is a 2 kHz modulated optical
signal. Use this mode to identify fibers at patch panels.

Shows the channel that is active.

CHANNEL: When SCAN ALL is OFF, press
change the channel.
 ON: The source transmits a wavelength
OFF: The source does not transmit a

Source Display Features
   
or
 
GUE04.EPS

for
to change the
 
or to
7