2.1 UNPACKING AND INSPECTION
Use care when unpacking the unit from the shipping carton to prevent damage to the
contents. It is also good practice to save the carton and the interior packing material. The
original packing material should be used in the unlikely event it is necessary to return the
unit to the factory.
2.2 EQUIPMENT SUPPLIED
The following is a list of materials supplied with the Ray48:
Description
Ray48 White
Ray48 Charcoal
Handbook
Power/External Speaker Cable
Microphone Bracket for White Radio
Microphone Bracket for Charcoal Radio
Mounting Yoke for White Radio
Mounting Yoke for Charcoal Radio
Yoke Knob w/Spacer for White Radio
Yoke Knob w/Spacer for Charcoal Radio
2.2.1 Optional Accessories
Description
Flush Mount Kit
2.3 PLANNING THE INSTALLATION
When planning the installation for your Ray48, the following conditions should be
considered to insure dependable and trouble-free operation.
• The mounting location should be easily accessible to allow operation of the front panel.
• The radio should be located at least 3 feet from the antenna.
• There should be adequate ventilation for the control unit.
• A sufficient space should be secured behind the transceiver to allow for proper cable
connections to the rear panel connectors.
SECTION 2
INSTALLATION
2
Part No.
E43020
E43021
81233
G623680-3
R49099
R49100
R49101
R49102
R49094
R49096
Part No.
E46034