Lcd Display - Raymarine Ray48 Owner's Handbook Manual

3.2.2 LCD Display

The following describes the functional characters on the Ray48's LCD.
SCAN: Will flash by itself when All-Scan mode is to be initiated or will flash in
1
unison with "MEM" when Memory Scan mode is to be initiated.
1 W (High/Low Power): Will be displayed when the transmitter circuits are
2
providing 1 Watt of power to the antenna. When the transmitter is supplying 25 Watts
to the antenna, the "1 W" indication will be extinguished.
ALT (Weather Alert): Will blink when a Weather Alert Tone has been detected.
3
WX (Weather): Will be displayed when the channel selected to be monitored is a
4
weather channel.
MON (Monitor): Will be displayed when the MON/INT key is pressed. This
5
indicates the radio is in the MONITOR mode.
INT (International/USA): Will be displayed when International channels are
6
programmed for use. "INT" is not displayed when US channels are programmed for
use.
TX (Transmit): Will be displayed on the LCD when the Push-To-Talk (PTT) switch
7
is depressed indicating the transmitter circuits are providing a signal to the antenna.
MEM (Memory): Will be displayed when the SCAN key is pressed and held for two
8
seconds, or when the radio is programmed to the MEMORY SCAN mode.
LCD Segments: Will display channel number in use.
9
1W SCAN
WX ALT
MON
INT MEM
TX
Fig.3-2 LCD DISPLAY
10