38
from Speed
calibration - sheet 1
Carry out the
return leg of
the second
cal run
At the end
of the return
cal run
speed
press
Speed calibration - sheet 2
9. Carry out a second calibration run (see sheet 2 of the Speed calibra-
Note: At the end of this second run, the text End alternating with the new
calibration factor is displayed at the bottom of the screen.
10. Press the speed key to leave distance calibration and return to the
At the start of the
outward cal run
press
speed
Alternating
tion flow chart), using the procedure described above in steps 4 to 8.
Instrument status screen.
ST60 Tridata Instrument Owner's Manual
At the end of the
outward cal run
At the start of
the return cal
run press
speed
Press
and
depth
speed
to store cal factor
Carry out the
outward leg of
the second
cal run
speed
press
Press
depth
to return to
Instrument status display
(Intermediate calibration)
D4421-1