Raymarine ST60 Tridata Owner's Handbook Manual page 40

28
•
•
•
•
•
•
•
•
Separate routines are provided for the User calibration of the depth and
speed functions. To carry out either of these routines:
1. Power up the ST60 Tridata instrument.
Starting User calibration
2. Press the
3. Carry out the User calibration procedures for Depth and Speed.
Lock the shallow alarm.
Set the required units for speed readings.
Set the speed resolution.
Select the log distance units
Either calibrate the speed reading to Speed Over Ground (SOG) or
manually apply a calibration factor, to obtain correct speed through
the water.
Select temperature units.
Calibrate for correct temperature readings.
Set timer alarm buzzer on or off.
To start User calibration
hold down
and
speed
depth
for approximately 2 seconds
press either
and
depth
the User calibration entry screen is displayed.
ST60 Tridata Instrument Owner's Manual
User calibration
entry screen
User calibration - depth
depth see
User calibration - speed
or speed see
keys for approximately 2 seconds so that
speed
illustration
illustration
D4416-1