To Set Top And Bottom Values For The Y-Axis - Agilent Technologies 35670A Operator's Manual

Scaling the Display

To set top and bottom values for the Y-axis

1
Activate the trace you want to scale.
2
Press [ ] [
Scale
TOP REFERENCE
When you press [
TOP REFERENCE
screen. You can use this window in one of two ways:
•
You can enter a new value for the top of the Y-axis (as described in the previous
task).
•
You can enter new values for both the top and the bottom of the Y-axis (as
described in this task).
The first number you type is used as the value for the top of the Y-axis. [
inserts a comma, indicating that the second number you type should be used as the
value for the bottom of the Y-axis. [
new values to take effect.
10-4
] <number> [ ] <number> [
BOTTOM
], an entry window is displayed at the top of the
] completes the numeric entry, causing the
ENTER
Agilent 35670A
Operator's Guide
].
ENTER
]
BOTTOM