Raymarine GPS Plotter Owner's Handbook Manual page 69

3-40
Refer to the setting guide shown in Figure 3-40 to determine the best
setting for your planned voyage; this is particularly important if you wish
to use SmartRoute to convert your track to a route.
1 sec 12½ min
5 sec 1 hr, 2½ min
10 sec
30 sec
1 min
3 min
5 min
10 min
30 min
TRACK TIME
0.1 nm
0.5 nm
1.0 nm
TRACK DISTANCE
You can change the setting at any time. The setting applies only to the
current track and is not saved as a stored track.
Note: Track points are not 'wasted' when the vessel is stationary as there
is a minimum distance separation, even when using a time interval set-
ting.
➤
To set up a track:
1. From the plotter display, press the MENU key to display the set up soft
2. Press the TRACK SETUP soft key to display the first level Track soft
2 hrs, 5 min
6 hrs, 15 min
75 nm
375 nm
Figure 3-40: Track Interval Setting Guide
keys as shown in Figure 3-41.
Figure 3-41: Set Up Soft Keys
keys as shown in Figure 3-42:
Figure 3-42: First Level Track Soft Keys
12 hrs, 30 min
1 day, 13 hrs, 30 min
2 days, 14 hrs, 30 min
750 nm
Raynav 300 GPS Plotter
5 days, 5 hrs
15 days, 15 hrs
D4918-1
...
D4919_1
D4948-2