Chapter 3: Operation
3. Use the soft keys to toggle between ETA or HOURS (elapsed) time and
➤
To change the SOG used for ETA calculations:
1. Press the PLANNED SOG soft key to switch to PLANNED SOG .
2. Press the up or down PLANNED SOG arrow soft keys to increment/dec-
3. Press the ACTUAL SOG key to use the actual SOG value rather than a
4. Press CLEAR to remove the Route Information window, then CLEAR
5. To return to the default soft key display, press CLEAR .
INFO FOR ROUTE - NEW ROUTE
Figure 3-33: Route Information Screen
to change the Speed Over Ground (SOG) value used in the time cal-
culations. The current selections are highlighted.
rement the planned SOG value.
The Time values in the Route Information list are updated.
planned one.
again to return to the route soft keys.
3-27
D4930-3