3-16
Note: Except for the CHAIN setting, numerical data is edited using the
trackpad as described in Editing Waypoint Details on page 3-18.
4. When editing is complete, press ENTER to save the waypoint details.
5. Press ENTER to place the waypoint in the waypoint list (or CLEAR to
6. When complete, press CLEAR as required to exit to the default dis-
iii. the SET TD 1 and SET TD 2 soft keys, which enable editing of each
TD's co-ordinate values.
(or CLEAR to cancel the operation); the display returns to the New
Waypoint screen.
abort the operation).
play.
Raynav 300 GPS Plotter