Erasing A Waypoint - Raymarine Raychart 320 Owner's Handbook Manual

Chartplotter
Hide thumbs Also See for Raychart 320:
Table of Contents

Advertisement

3-24
5. Use the trackpad to enter or edit the name:
6. When name editing is complete, press ENTER to save the name and
7. Press CLEAR to return to the default soft keys.
8. To edit the waypoint position, press the EDIT WAYPOINT soft key, fol-
9. Use the soft keys to select LAT , LON , BRG or RNG .
Note: If no fix has been acquired, the SET BRG and SET RNG soft keys are
unavailable and grayed out.
10. Use the trackpad to edit the value:
11. When position editing is complete, press ENTER to save the position

Erasing a Waypoint

In chartplotter mode you cannot erase the target waypoint or waypoints
that are used in routes. However, you can remove a waypoint from the
current route - see Editing a Route on page 3-35.
If you try to erase a waypoint that is used in a saved route you are warned
WAYPOINT IS USED IN A ROUTE & CANNOT BE DELETED .
To delete a waypoint using the Waypoint List:
1. Select the waypoint from the Waypoint List as previously described.
2. Press the EDIT WAYPOINT soft key, followed by ERASE WPT . The way-
3. If the the deleted waypoint was the only waypoint in the list, the
Use the trackpad left/right to move the cursor to the character to
be changed.
Use the trackpad top/bottom to scroll through the characters.
remove the window, or CLEAR to cancel the operation. The waypoint
name replaces the waypoint number.
lowed by POSITION .
The Waypoint Position pop-up box is displayed.
Use the trackpad left/right to move the cursor to the character to
be changed.
Use the trackpad top/bottom to scroll through the characters.
Adjust each parameter until the waypoint position is correct.
or CLEAR to cancel the operation.
The Waypoint Position window is removed from the screen and the
default soft keys are displayed.
The Waypoint List soft keys are displayed.
point is removed from the screen and the Waypoint List is updated.
default soft keys are displayed, otherwise, press CLEAR three times to
return to the default soft keys.
Raychart 320 Chartplotter

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents