Selecting An Input Image - Sony MVS-6000 User Manual

Selected file.
When a pair file is selected each press switches the front and the back.
Thumbnail indications
Still image files and clip files: Still image files are displayed as gray buttons
and clip files are displayed as yellow buttons.
Single files and pair files: Single files are displayed with shadow and pair files
are displayed with no shadow.
Selected file: Pale blue border. When more than one file is selected, only the
first is pale blue, and the remainders are amber. If the pair file was selected,
each press switches the front and the back.
File information detail display
For the selected file, this shows the file name, "P" if a pair file, "A" if an
ancillary data attached clip, and the duration.
g Frame memory folder selection area
Select the frame memory folder to be displayed.
h Direct Recall button
Toggle on and off the direct recall mode in which pressing a thumbnail
immediately recalls the file.

Selecting an Input Image

For the input image to frame memory, you can use either the signal selected on
one of the two frame memory source buses or a dedicated color matte signal.
File information detail display
263
Still Image Operations