Sony MVS-6000 User Manual page 107

3
For the transition to change the key priority, set the priority for after the
transition.
For details of the key priority setting operation, see "Key Priority Setting"
(page 109).
4
Select the new video used for the transition.
• In the background B row of cross-point buttons, select the new
background video.
• When inserting a key, select the key signal, and make any required
settings.
For details of key settings, see Chapter 4 "Keys" (page 139).
To carry out a cut transition, skip to step 7; otherwise continue to step 5.
5
Select one of the transition type selection buttons in the transition control
block.
To carry out a dissolve to the new video: Press one of the [MIX],
[NAM], [SUPER MIX], and [PST COLOR MIX] buttons, turning it
on.
To carry out a wipe: Press the [WIPE] or [DME] button, turning it on.
To carry out a transition while playing back a frame memory clip:
Press one of the buttons corresponding to the clip to be used
(FM1&2CLIP, FM3&4CLIP, FM5&6CLIP, and FM7&8CLIP).
You can also use the Misc >Transition menu to select a desired transition
type for the M/E or PGM/PST bank. (See "Selecting the Transition Type
by a Menu Operation" (page 114).)
For an overview of the transition types, see "Transition Types" (page
103).
Note
The transition type selection buttons in the transition control block can be
interchanged in the setup menu.
For details, see "Overall Control Panel Settings (Config Menu)" in
Chapter 19 (Volume 3).
6
Make the required settings, according to the selected transition type.
For details of the settings, see the relevant section.
Super mix: "Super Mix Settings" (page 115)
Preset color mix: "Color Matte Settings" (page 116)
Wipe: "Basic Procedure for Wipe Settings" (page 201)
Procedure for Basic Transition Operation
107