Safety Notices For Hazardous Areas - Siemens SCALANCE X-200 Operating Instructions Manual

3.2

Safety notices for hazardous areas

Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
EXPLOSION HAZARD
DO NOT OPEN WHEN ENERGIZED.
Safety notices when using the device according to Hazardous Locations (HazLoc)
If you use the device under HazLoc conditions you must also keep to the following safety
notices in addition to the general safety notices for protection against explosion:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-
hazardous locations only.
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations
only.
SCALANCE X-200
Operating Instructions, 03/2015, C79000-G8976-C284-06
WARNING
3.2 Safety notices for hazardous areas
Safety notices
29