Hotpoint SX1046LPX Service Information page 46

Indesit Company
O) Door Lock
1. Remove the oven from the cabinet (A).
2. Remove the top cover (6 screws).
3. Note and remove the connections to the door lock.
4. Remove the 2 screws securing the door lock and lift away.
5. Reassemble in reverse order.
P) Oven Door Complete
1. Remove the oven from the cabinet (A).
2. Open the door fully.
3. Remove the screw and access panel on the right hand side.
4. Disconnect the plug and feed the cable through the front of the oven housing.
5. Use a screwdriver to lift up the small levers located on the two hinges (See Figs. 12 and 13).
6. Grip the door on the two outer sides and close it approximately half way.
7. Pull the door towards you lifting it out of the hinge blocks.
Fig. 9
Fig. 12
Q) Door Glasses & Door LEDs
Note:- Although the oven door is triple glazed, all the glasses can be accessed and replaced.
1. Remove the oven door (P).
2. Remove the two screws securing the removable lower profile at the bottom of the door.
3. Lift clear after feeding the LED wires through the access hole.
4. Lift the inner door glass clear.
5. Lift the centre glass clear complete and if the LEDs are attached feed the wires through the fixed
profile on the door.
Service Manual UK
Fig. 10
46 of 49
Fig. 11
Fig. 13
continued overleaf......
English