Hotpoint SX1046LPX Service Information page 11

Indesit Company
Replacing the Plug
Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be
accidentally inserted into a socket. Instructions for connecting cable to an alternative plug:
How to Connect an Alternative Plug
The wires in this mains lead are coloured in accordance with the
following code:
Green & Yellow - Earth 'E'
Blue - Neutral 'N'
Brown - Live 'L'
If the colours of the wires in the mains lead do not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows.
Connect Green & Yellow wire to terminal marked "E" or 6 or coloured Green or Green & Yellow.
Connect Brown wire to terminal marked "L" or coloured Red. Connect Blue wire to terminal marked "N"
or coloured Black. If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp fuse.
A 15 amp plug must be protected by a 15 amp fuse, either in the plug or adaptor or at the distribution
board.If you are in any doubt about the electrical supply to your machine, consult a qualified electrician
before use.
The plug must be accessible at all times.
Unplug the appliance before all operations, even when replacing the oven lamp.
Using the appliance without correct earthing is highly dangerous.
After connecting the appliance to the flexible cable, tighten all the screws on the terminal
board.
Service Manual UK
11 of 49
GREEN &
YELLOW
13 amp fuse
BROWN
CROSS-BAR
BLUE
CORD GRIP
English