Troubleshooting - Hotpoint SX1046LPX Service Information

Indesit Company
4. Press to begin the pyrolysis schedule.
5. The display shows the remaining time, moving the delayed start bar backwards.
6. Once pyrolysis has begun, the display will indicate the remaining time by filling the duration bar.
7. When the time has elapsed, 'CLEANING CYCLE FINISHED' appears on the display and a buzzer
sounds.
• For example: it is 9:00 a.m. and the Economy PYROLYTIC cycle has been selected: default set
time 1 hour. 12:30 is scheduled as the end time.
The programme will start automatically at 11:30 a.m.
To cancel a schedule, press the
Once the Automatic Cleaning Cycle is Over
Before you can open the oven door, you will have to wait for the
oven temperature has dropped to an acceptable level. You will notice some white dust deposits on the
bottom and the sides of your oven; remove these deposits with a damp sponge once the oven has
cooled down completely. Alternatively, you can make use of the already heated oven, in which case it
is not necessary to remove the deposits, they are completely harmless and will not affect your food in
any way.

TROUBLESHOOTING

Problem
A programmed cooking model
does not start.
The display shows ECO
mode.
An automatic mode has been
selected. 'Hot' appears on the
display and cooking does not
start.
Fan assisted cooking has
been selected and the food
looks burnt.
NOTICE
Do not place
or rest anything
on the open door
Service Manual UK
icon.
Possible Cause
There has been a power cut.
The appliance is in stand-by mode.
The temperature inside the oven is
higher than the suggested value for
the selected mode.
Positions1 and 5; the direct heat
could cause temperature sensitive
food to burn.
Make sure that the racks
and dripping pans have been
inserted fully before closing the door
32 of 49
icon to switch off: this indicates the
Solution
Reprogramme the cooking
mode.
Press any button to exit
stand-by mode.
Wait for the oven to cool down.
We recommend switching
dripping pan positions half way
through cooking.
Please read the manual
carefully for information
regarding the automatic
cleaning (pyrolytic) cycle
English