Hotpoint SX1046LPX Service Information page 45

Mono control electronic multifunction pyrolytic built in single ovens with led door lighting
Table of Contents

Advertisement

Indesit
Company
K) Circular Oven Element
1.
Remove the oven furniture.
2.
Remove the 4 screws on the fan cover in the oven.
3.
Remove the 2 screws securing the oven element.
4.
Pull the element forward and draw the wires through into the oven cavity. Disconnect the wires from
the oven element, ensuring that they do not slip back into the rear panel void.
NOTE: - Should the wiring not be accessible using the above method of replacement, it will be
necessary to remove the oven from its housing and remove the rear panel of the product to gain
access to the wiring.
5.
Reassemble in reverse order.
L) Oven Fan & Motor Assembly
1.
Remove the oven from the cabinet (A).
2.
Remove the rear panel, 6 screws and disconnect the electrical connections from the mains terminal
block, noting their respective positions and place the panel to one side.
3.
Remove the 4 screws on the fan cover in the oven.
4.
Remove the single nut on the oven fan (clockwise thread) and remove.
5.
Remove the 3 screws from the motor from the rear of the cooker, not and remove the wiring and
replace.
6.
Reassemble in reverse order.
M) Oven Lamp Assembly
1.
Remove the oven from the cabinet (A).
2.
Remove the top cover (6 screws).
3.
Remove the screws from the left hand side of the rear panel looking from the back.
4.
Remove the remaining 7 screws from the right hand side panel including the 1 screw from
underneath the oven.
5.
Unhook the door LED wiring and connector from its clip and lift the panel away.
6.
Disconnect the wiring to the oven lamp assembly.
7.
Push down on the 4 tags securing the lamp assembly and ease into the oven cavity to remove.
8.
Reassemble in reverse order ensuring that the oven top cavity cover plate is in the correct position
and sits flush against the side panel.
N) Door LED Transformer
1.
Remove the oven from the cabinet (A).
2.
Remove the top cover (6 screws).
3.
Disconnect the wiring.
4.
Remove the two screws securing the transformer to the chassis.
5.
Lift clear.
Service Manual UK
45 of 49
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx1046lpxsSx1046slp0xSx1046slpx

Table of Contents