Table of Contents
Advertisement
Reference Manual
00809-0100-7062
6
Operation and maintenance
6.1
Safety messages
Instructions and procedures in this section may require special precautions to ensure the
safety of the personnel performing the operations. Information that potentially raises
safety issues is indicated by a warning symbol (
before performing an operation preceded by this symbol.
WARNING
Failure to follow safe installation and servicing guidelines could result in death or
serious injury.
Ensure the transmitter is installed by qualified personnel and in accordance with applicable
code of practice.
Inspection and maintenance of this equipment shall be carried out by suitably trained
personnel, in accordance with the applicable standards and code of practice.
Use the equipment only as specified in this manual. Failure to do so may impair the
protection provided by the equipment.
Repair, e.g. substitution of components, etc. may jeopardize safety and is under no
circumstances allowed.
WARNING
Process leaks could result in death or serious injury.
Handle the transmitter carefully.
Install and tighten process connectors before applying pressure.
Do not attempt to loosen or remove process connectors while the transmitter is in service.
6.2
View measurement data and events
The dashboard in Rosemount IO-Link Assistant displays the measured values, device
status, switching status for digital output (on/off), and events. The measured values and
switching states are visualized in a graph over a defined period of time.
Procedure
From the Overview screen, select Dashboard.
Reference Manual
Operation and maintenance
). Refer to the following safety messages
October 2022
39
Advertisement
Table of Contents
Troubleshooting
