Table of Contents
Advertisement
TURNING THE KEY TONE OFF/ON
To turn off the key tone, follow these steps.
1. Turn off the scanner.
2. While holding down
ner.
OFF bEEP
To turn the key tone back on, repeat these steps.
appears.
bEEP
TURNING THE BATTERY SAVE
FUNCTION OFF/ON
To save battery power when a channel is manually se-
lected or while you program the scanner, the scanner
automatically sets itself to a standby (battery save)
mode if no button is pressed for more than 5 seconds
and no signal is received.
save is set to on.
While the battery save mode is set to on, the scanner
repeatedly turns off the internal power for 1 second,
then turns it back on for about
transmission.
The scanner is preset with the battery save mode set to
on, but you can turn it off or back on.
Note: The battery save mode does not work if the prior-
ity function is on, even if a channel is manually select-
ed.
To turn the battery save function off or back on, turn off
the scanner, then hold down
scanner.
•
OFF SAVE
been turned off.
•
on SAVE
been turned on.
L-OUT/S/S,
appears.
briefly appears when battery save has
briefly appears when battery save has
turn on the scan-
appears when battery
S
1
/
second to check for a
2
and turn on the
PRIORITY
on
37
Hide quick links:
Advertisement
Table of Contents
