Radio Shack HANDHELD TRUNKING 20-521 Owner's Manual page 51

DATA
4. Press
5. Repeatedly press s or t to select the name of the
map you want (such as
grammed fleet map appears.
6. Press
E
transmissions using the preset map you chose.
Note: When the scanner searches for transmissions,
you see Type I fleet and subfleet IDs such as
,
100-9 000-12
How do you know if the preset map you selected is cor-
rect? Listen to see if you are following complete conver-
sations. If not, try another preset map.
Programming a Fleet Map
1. Set the scanner for conventional scanning, press
, then press
PROG
2. Select the bank where you want to program the
fleet map by pressing a number key.
DATA
3. Press
4. Repeatedly press s or t to select
DATA
. A preprogrammed fleet map appears.
5. Repeatedly press s or t until
press .
E
DATA
6. Press
7. Repeatedly press s or t to select the size code for
the first block, then press
block appears.
8. Repeat Step 7 until you have selected a size code
for each block you want to work with.
again.
, then The scanner then searches for
SRC.
, or
400-8
TRUNK
.
.
Block
). The prepro-
E1P7
.
.
E1
appears. Then
USr
. The next available
E
100-12 ,
, then press
51