Resetting The Scanner - Radio Shack HANDHELD TRUNKING 20-521 Owner's Manual

PROBLEM
Channel activity
bars are flashing
but no sound is
heard.

RESETTING THE SCANNER

If the scanner's display locks up or does not work prop-
erly, you might need to reset the scanner.
Caution: This procedure clears all the information you
have stored into the scanner. Before you reset the
scanner, try turning it off and on to see if it begins work-
ing properly. Reset the scanner only when you are sure
it is not working properly.
1. Turn off the scanner.
2. While you hold down the
scanner.
the scanner clears its memory.
Note: Do not turn off the scanner until
flashing. Otherwise, the scanner might not clear its
memory properly.
66
POSSIBLE
CAUSE
The transmis-
sion might be a
private or tele-
phone intercon-
nect call. The
scanner does not
scan these types
of transmissions.
The ID shown is
not active.
flashes for about 8 seconds as
CLEAR
REMEDY
Scan for another
transmission.
Wait for the ID to
become active, or
scan another
transmission.
and keys, turn on the
2 9
CLEAR
stops