Chapter 3 - Hardware Configuration; System Hardware; 802.11 A/B/G Wireless Client; Central Processing Unit - Honeywell MX7 Tecton User Manual

3
Hardware Configuration

System Hardware

802.11 a/b/g Wireless Client

The MX7 Tecton has an 802.11 network card that supports diversity with two internal antennas. The CPU board does not
allow hot swapping the network card. WEP, WPA and LEAP are supported.

Central Processing Unit

The CPU is an 806MHz Marvell PXA-320 CPU. The OS image is stored in internal flash and is loaded into RAM for execu-
tion. Turbo mode switching is supported and turned on by default.
The MX7 Tecton supports the following I/O components of the core logic:
• One SD card slot under the main battery pack.
• One serial port.
• One Digitizer Input port (Touch screen).
Program CAB files, MX7 Tecton utilities, wireless drivers, the registry and registry backup information are stored in internal
Flash.

System Memory

The CPU configuration supports 256MB on-board flash. The system optimizes for the amount of RAM available.
Internal flash is used for boot loader code and system low-level diagnostics code. Bootloader code is validated at system
startup.

Internal SD Card Slot

One SD Memory card slot for Expansion Memory, located in the main battery well, and protected by a rubber flap. 1GB and
4GB flash memory cards are available from Honeywell.
27