Honeywell MX7 Tecton User Manual page 212

Data
The Data tab controls when data is transferred between the MX7 Tecton and the Mobile Device Server.
Setting
Transfer Data When Device is Idle
Idle timeout
Real-time Statistics
Report
Retransmit After Server Contact
206
Function
When enabled, periodic updates from the Mobile Device Server are post-
poned until the MX7 Tecton has been idle for the specified period of time. The
default is disabled.
Specify the length of time the device must be idle before a periodic update
can run, used when the parameter above is enabled.
When checked, the statistics are transmitted over the network by the En-
abler.
Specifies the Report Interval, how frequently the Enabler reports statistics to
the Mobile Device Server.
Specifies if the device sends statistics to the Mobile Device Server immedi-
ately following a connection to the server.