System - Honeywell MX7 Tecton User Manual

System

Start > Settings > Control Panel > System
Use these MX7 Tecton panels to:
• Review System and MX7 Tecton data and revision levels.
• Adjust Storage and Program memory settings.
• Assign a device name and device descriptor.
Setting
General Tab No user interaction
Memory Tab 1/3 storage, 2/3 program memory
Device Name Tab
Device Name Tecton (may vary by OS revision level)
Device Description WindowsCE Device (may vary by OS revision level)
Copyrights Tab No user interaction
General
System
This screen is presented for information only. The System parameters cannot be changed by the user.
Computer
Processor: The processor type is listed. The type cannot be changed by the user. Total computer memory and the
identification of the registered user is listed and cannot be changed by the user.
Memory: Memory sizes given do not include memory used up by the operating system. For example, a system
with 128 MB may only report 99 MB memory, since 29 MB is used by the operating system. This is actual DRAM
memory, and does not include internal flash used for storage.
Expansion cards: If installed, they are listed.
98
Default