About Scanning Configuration Barcodes; Use The Scan Demo App - Honeywell CK65 Series User Manual

Before you start scanning barcodes, go into Settings > Honeywell Settings >
Scanning > Internal Scanner and modify the scan profile to enable only the
barcode symbologies that you need. By reducing the active symbology list, you can
increase scan speed.
1. Point the scanner window at the barcode. For optimum performance, avoid
2. Press and hold any Scan button (i.e., right, left, or front).
3. Center the aiming beam over the barcode. Make sure the entire barcode is
4. Release the Scan button when the computer beeps, and the Scan Status LED
Note: Not all barcode symbologies are enabled by default. If a barcode does not scan, the
correct symbology may not be enabled.

About Scanning Configuration Barcodes

After completing the out-of-box set up process, Provisioning mode is
automatically turned Off. Scanning a barcode to install applications, certificates,
configuration files, and licenses on the computer is restricted unless you turn On
(enable) Provisioning mode in the Settings app.
To learn more

Use the Scan Demo App

Use the Scan Demo app to read barcodes or to test your symbology decode settings.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap the Demos app.
CK65 Mobile Computer User Guide
reflections by scanning the barcode at a slight angle.
inside the illumination frame.
briefly turns on. The barcode information is entered into the application in use.
About Provisioning Mode see page 83.
57