Honeywell MX7 Tecton User Manual page 317

A
Keymaps
Introduction
Sticky keys are also known as second function keys. Ctl/Ctrl, Alt, Shft, Blue and Orange keys are sticky keys. Sticky keys do not
need to be held down before pressing the next (or desired) key. You can use combined modifiers on specific keys.
The key mapping in this section relates to the physical
used with the stylus.
55 key Alphanumeric Keymap - Primary Delete
To get this Key / Function
Power / Suspend
Field Exit (default VK_PAUSE)
MAP = Mappable
Volume Adjust Mode
Volume Adjust Mode
Display Backlight Brightness Adjust Mode
Toggle Blue Mode
Toggle Orange Mode
Toggle Shift Mode
Alt
Control
Esc
Space
Enter
Scan
CapsLock (Toggle)
Back Space
Keypads (page 30). See the Input Panel for the Virtual (or Soft) Keypad
• The following keymap is used on an MX7 Tecton that is NOT running a Terminal
Emulator. Terminal emulators use a separate keymap.
• When using a sequence of keys that includes a sticky key, press the sticky key first,
release it, then press the rest of the key sequence.
• When using a sequence of keys that includes the Orange or Blue keys, press the color
key first then the rest of the key sequence.
• Tapping the Power key when in any sticky mode (Blue, Orange, Shift, etc.) either turns
the device On (when Off) or places it in Suspend (when On).
• Alphabetic keys default to lower case letters. Press the Shft key, then the alphabetic key
for an uppercase letter.
• For those keymaps that require remapping (MAP), keys can be remapped using the
KeyPad Panel (Start > Settings > Control Panel > KeyPad).
• When the computer boots, the default condition of Caps (or CapsLock) is Off. The Caps
(or CapsLock) condition can be toggled with Blue plus Tab key sequence.
Power
Blue (MAP)
Orange
Blue
Blue
Blue
Orange
Shft
Alt
Ctl
Blue
Spc
Enter
Scan
Blue
Orange
Press these Keys in this Order
Orange (MAP) Shift (MAP)
Scan Up Arrow / Down Arrow
V Up Arrow / Down Arrow
Scan
Alt
Tab
Spc
Diamond #1
311