Chapter 6 - System Settings; Communication Options; Installing Additional Software - Honeywell Dolphin 6110 User Manual

6
System Settings

Communication Options

Dolphin terminals offer several communication options including Microsoft ActiveSync and wireless
radios.
I/O Connector (Wired Communication)
The mechanical connector on the bottom panel (see
the terminal to various Dolphin communication peripherals that connect to a host workstation
via USB 2.0, thus enabling ActiveSync communication.
For more information, see
Wireless Radios (Wireless Communication)
Dolphin 6110s can be equipped with 802.11a/b/g/n and Bluetooth radios or just a Bluetooth
radio. For more information, see

Installing Additional Software

Dolphin terminals ship with the operating system, radio drivers, and custom Honeywell software already
installed. These are the default programs that install when your terminal first boots up. You can install
additional software programs on the terminal provided that the following parameters are met:
• the software program was created for a Windows CE device.
• the terminal has enough memory to store and run the program.
• the program has an EXE, CAB, or DLL extension.
When selecting programs, verify that the program and version of the program are designed for the
Windows CE 6.0 and the terminal's processor. You can verify your processor by tapping Start > Settings
> Control Panel > System > General tab. Make a note of the information in the Processor field.
To install additional software, you can use the communication options described in this chapter.
• Adding Programs via
• Adding Programs from the
ActiveSync Communication
Wireless Radios
ActiveSync, page 6-6.
Internet, page 6-8.
I/O Connector on page 3-11) connects
on page 6-3.
on page 6-7.
6-1