Table of Contents
Advertisement
TRANSPORTING LITHIUM BATTERIES
Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further
advice.
MAINTENANCE
WARNING
Use
only
original
replacement
parts,
attachments. Failure to do so can cause
possible injury and poor performance, and
may void your warranty.
WARNING
Servicing
requires
knowledge and should be performed only by
a qualified service technician. For service,
bring the product to an authorised service
centre. When servicing, use only original
replacement parts.
■
Stop the product, remove the battery
pack, and allow the product to cool down.
Disconnect the product from the water
supply before:
●
cleaning the product
●
maintaining the product
●
replacing spare parts
■
You may make adjustments or repairs
described in this manual. For other repairs,
contact an authorised service centre.
■
Regularly inspect and maintain the high
pressure cleaner for safe operation. Ryobi
recommends inspecting the product every
6 months.
■
Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure the
product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorised
service centre.
6
manufacturer's
accessories,
and
extreme
care
and
KNOW YOUR PRODUCT
See page 11.
1.
Handle
2.
Trigger handle
3.
Trigger handle lock
4.
Trigger
5.
Hose strap
6.
Water inlet
7.
Wheel
8.
Bladder
9.
Siphon hose
10. Water inlet adapter
11. High-pressure hose
12. Charger
13. Battery
14. 5-in-1 nozzle
15. Turbo nozzle
16. Soap tank
17. Water outlet
18. Soap tank cap
19. Battery cover
20. Boost button
21. Power switch
22. Spray wand
SYMBOLS ON THE PRODUCT
Warning
To reduce the risk of injury from
kickback, hold the spray wand
securely with both hands when
the product is on.
To reduce the risk of injury, read
and understand the operator's
manual
product.
Wear
protection.
To reduce the risk of injury
from high-pressure injection, do
not direct spray at persons or
animals.
Remove the battery before
starting any maintenance work
on the product.
Wear
non-slip,
protective gloves.
The product is not suitable
for connection to the drinking
water mains without backflow
preventer.
before
using
the
eye
and
hearing
heavy-duty
Hide quick links:
Advertisement
Table of Contents
