Transporting Lithium Batteries; Maintenance; Know Your Product; Safety Devices - Ryobi RY18PWX41A Manual

■
Remove water from all hoses and the pump,
and empty the detergent tank before storing
the product.
■
Neatly coil the siphon hose, and store it with
the power washer.
■
Clean all foreign materials from the product.
Store it in a cool, frost-free, dry, and well-
ventilated place that is inaccessible to
children. Do not store the product near the
furnace or other sources of heat that could
dry out the pump seals. Keep the product
away from corrosive agents, such as garden
chemicals and de-icing salts. Do not store
the product outdoors.
■
For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
WARNING! Store the product indoors only.
Storing in an area with temperature below 0°
will damage the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further advice.

MAINTENANCE

Use only original manufacturer's replacement
parts, accessories, and attachments. Failure to
do so can cause possible injury, can contribute to
poor performance, and may void your warranty.
Servicing requires
knowledge and should be performed only by a
qualifi ed service technician. Have the product
serviced by an authorised service centre only.
When servicing, use only original replacement
parts.
■
Stop the product, remove the battery
pack, and allow the product to cool down.
Disconnect the product from the water
supply:
●
before cleaning the product
●
before maintaining the product
●
before replacing spare parts
extreme care and
■
You may make adjustments or repairs
described in this manual. For other repairs,
contact an authorised service centre.
■
Regularly inspect and maintain the product
for safe operation. Ensure that the battery
compartment is properly assembled, tightly
closed, and frequently check for damages.
Any part that is damaged should be properly
repaired or replaced by an authorised
service centre.
■
If the product is to be stored unused for
a long period, the batteries should be
removed.

KNOW YOUR PRODUCT

See page 109.
1. Release button
2. Mode control selector
3. Low mode
4. Middle mode
5. High mode
6. Latch
7. Lock-out button
8. Handle grip
9. Switch trigger
10. Battery compartment
11. 2L bottle adapter
12. Water inlet
13. Quick connector
14. Siphon hose
15. Floater
16. Filter
17. Metal wand
18. 3-in-1 nozzle
19. Operator's manual
20. Battery pack
21. Charger
22. RYOBI detergent
WARNING! Do not connect the 3-in-1
nozzle to the product using only the RAC764
pivoting adapter. Always use the included
metal wand or an extension wand when using
the pivoting adapter.

SAFETY DEVICES

■
Lock-out button
– The lock-out button locks the switch
trigger and prevents
opening of the high-pressure jet.
unintentional
5
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR