Transporting Lithium Batteries; Maintenance; Safety Devices; Symbols On The Product - Ryobi R36XPWS10 Manual

Table of Contents

Advertisement

For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
WARNING! Store the product indoors only.
Storing in an area with temperature below 0°
will damage the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further advice.

MAINTENANCE

Use
only
original
replacement
parts,
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
Servicing
requires
knowledge and should be performed only
by a qualified service technician. Have the
product serviced by an authorised service
centre only. When servicing, use only
original replacement parts.
Stop the product, remove the battery
pack, and allow the product to cool down.
Disconnect the product from the water
supply:
before cleaning the product
before maintaining the product
before replacing spare parts
You may make adjustments or repairs
described in this manual. For other repairs,
contact an authorised service centre.
Regularly inspect and maintain the product
for safe operation. Ensure that the battery
compartment is properly assembled, tightly
closed, and frequently check for damages.
Any part that is damaged should be properly
repaired or replaced by an authorised
service centre.
If the product is to be stored unused for
a long period, the batteries should be
removed.
4
Original Instructions
manufacturer's
accessories,
and
extreme
care
and

SAFETY DEVICES

Lock-out button
The lock-out button locks the switch
trigger
and
prevents
opening of the high-pressure jet.

SYMBOLS ON THE PRODUCT

Warning
To reduce the risk of injury,
read
operator's
using the product.
Wear
protection.
Do not expose the product to
rain or damp conditions.
The product is not suitable
for connection to the drinking
water supply without backflow
preventer.
Never point the spray wand to
human, animals, the body of
the product, power supply, or
any electrical appliances.
Regulatory
Mark (RCM). The product
meets applicable regulatory
requirements.
Waste
should not be disposed of
with household waste. Please
recycle where facilities exist.
Check with your local authority
or retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Parts
or
separately
Note
Warning
unintentional
and
understand
the
manual
before
eye
and
hearing
Compliance
electrical
products
accessories
sold

Advertisement

Table of Contents
loading

Table of Contents