Disconnect The Scv360 Expansion Enclosure From The B-Side Of The Chain - Dell SCv3000 Deployment Manual

Figure 73. Reconnecting the A-Side Cable to the Remaining Expansion Enclosure
1 Storage system
3 Storage controller 2
5 Expansion enclosure 2
Disconnect the SCv360 Expansion Enclosure from the B-Side
of the Chain
Disconnect the B-side cables from the expansion enclosure that you want to remove.
1 Disconnect the B-side cable (shown in blue) from expansion enclosure 1: right EMM, port 1. The A-side cables continue to carry I/O
while the B-side is disconnected.
2 Remove the B-side cable between expansion enclosure 1: right EMM, port 3 and expansion enclosure 2: right EMM, port 1.
2 Storage controller 1
4 Expansion enclosure 1
Adding or Removing Expansion Enclosures 91