Add An Scv360 Expansion Enclosure To The B-Side Of The Chain - Dell SCv3000 Deployment Manual

Figure 65. Connect A-Side Cables to the New Expansion Enclosure
1 Storage system
3 Storage controller 2
5 New expansion enclosure (2)
5 Label the back-end cables.
Add an SCv360 Expansion Enclosure to the B-Side of the
Chain
Connect the expansion enclosure to one side of the chain at a time to maintain drive availability.
1 Disconnect the B-side cable (shown in blue) from the expansion enclosure: right EMM, port 3. The A-side cables continue to carry I/O
while the B-side is disconnected.
2 Storage controller 1
4 Expansion enclosure 1
Adding or Removing Expansion Enclosures 83