Install New Scv360 Expansion Enclosures In A Rack - Dell SCv3000 Deployment Manual

Figure 55. Connect the B-Side Cables to the Expansion Enclosures
1 Storage system
3 Storage controller 2
5 Expansion enclosure 2
2 Label the back-end cables.

Install New SCv360 Expansion Enclosures in a Rack

Install the expansion enclosures in a rack, but do not connect the expansion enclosures to the storage system. For more information, see
the SCv360 Expansion Enclosure Getting Started Guide
About this task
Steps
1 Cable the expansion enclosures together to form a chain.
a Connect a SAS cable from expansion enclosure 1: left, port 3 to expansion enclosure 2: left, port 1.
b Connect a SAS cable from expansion enclosure 1: right, port 3 to expansion enclosure 2: right, port 1.
c Repeat the previous steps to connect additional expansion enclosures to the chain.
74 Adding or Removing Expansion Enclosures
2 Storage controller 1
4 Expansion enclosure 1