From The Base; Receiving A Call/Autotalk Set To Off - Uniden ELBT 595 Series Owner's Manual

Multi-handset phone
Hide thumbs Also See for ELBT 595 Series:
Table of Contents

Advertisement

UP744.book Page 49 Friday, November 5, 2004 4:22 PM

From the base

1) Press
/flash or the LAND soft key.
For Mobile line connection, press the MOBILE soft key.
2) Listen for the dial tone.
3) Dial the number.
OR
1) Dial the number.
If pause is required, press menu/select, and select
2) Press
/flash or the LAND soft key for the Land line. For Mobile line
connection, press the MOBILE soft key. Use up/down key, to select the cellular
phone to use and press the CONNECT soft key.

Receiving a call/AutoTalk set to OFF

Handset is in the cradle
1) Remove the handset from the
charging cradle.
2) Flip the top panel up.
3) Press talk/flash or the corresponding
soft key (LAND or MOBILE).
If Open to Answer is ON, the phone will
automatically answer the call when you
flip the top panel up.
[ 4 9 ] U s in g Y o ur P ho n e
from the list.
Handset is off the cradle
1) Flip the top panel up.
2) Press talk/flash or the corresponding
soft key (LAND or MOBILE).
If Any Key Answer is set to On, you can
also press any number key on the
keypad to answer a call.
note
•To set Open to Answer
see page xx or to set
"Any Key Answer" see
page xx.
•If you plug a headset,
or use the handset
speaker phone, you
can not hang up the
call when you close the
top panel.
w w w . u n i d e n . c o m

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elbt 595 series

Table of Contents