Omron SYSDRIVE 3G3FV-*-CUE Installation Manual page 36

Installation
D Control Circuit Terminals for All 3G3HV-j-CUE Models
Symbol
Se- S1 Forward run/Stop
quence S2
Multi-function input 1 (S2)
input
S3 Multi-function input 2 (S3)
S4 Multi-function input 3 (S4)
S5 Multi-function input 4 (S5)
S6 Multi-function input 5 (S6)
SC Sequence input common
SS Sequence switching terminal
SP Sequence power +24V
Analog FS Frequency reference power supply
input
FV Frequency reference input (voltage)
FI Frequency reference input (current)
FC Frequency reference input common
Shield E (G) Shielded wire connecting ground
Se- MA Multi-function contact output 1 (nor-
quence mally open)
output
MB Multi-function contact output 1 (nor-
mally closed)
MC Multi-function contact output 1 com-
mon
M1 Multi-function contact output 2 (nor-
mally open)
M2 Multi-function contact output 2 com-
mon
Analog
AM Multi-function analog output
output
AC Multi-function analog output common
--- R+ For option
R–
S+
S–
Note Multi-function inputs 1 to 5 and multi-function contact outputs 1 to 2 allow selection of various
functions by changing parameter settings. The setting shown in parentheses in the Function col-
umn for the multi-function inputs and multi-function contact outputs indicate the default settings.
Name
Stops at OFF.
Set by constant n035 (reverse run/stop).
Set by constant n036 (external error a).
Set by constant n037 (error reset).
Set by constant n038 (multi-step speed
reference 1).
Set by constant n039 (multi-step speed
reference 2).
Common for S1 to S6.
NPN/PNP input switching terminal
Power common for S1 to S8
DC power supply for frequency reference
Frequency reference voltage input terminal 0 to 10 VDC
Current input terminal for frequency refer-
ence
Common for FV, FI
For connecting to shielded wires
Set by constant n040 (error)
Common for MA, MB
Set by constant n041 (running)
Common for M1
Set by constant n048 (output frequency)
Common for AM
www.dadehpardazan.ir 88594014-15
Function (see note)
Chapter 2
Signal level
Photocoupler
24 VDC, 8 mA
15 VDC 20 mA
max.
(Input imped-
ance: 20 kΩ)
4 to 20 mA
(Input imped-
ance: 250 kΩ)
---
---
Contact output
30 VDC, 1 A
max.
250 VAC, 1 A
max.
0 to 10 VDC,
2 mA
2-17