Omron SYSDRIVE 3G3FV-*-CUE Installation Manual page 34

Installation
Symbol
Se-
9 Multi-function contact output (NO con-
quence dition)
output
10 Multi-function contact output common
25 Multi-function output 1
27 Multi-function output 1 common
26 Multi-function output 2
37 Multi-function output 2 common
18 Fault output (NO condition)
19 Fault output (NC condition)
20 Fault output common
Analog 21 Multi-function analog output 1
output
23 Multi-function analog output 2
22 Multi-function analog output common
--- For option
40
41
42
43
Note Multi-function inputs 1 to 5, multi-function contact outputs, and multi-function output 1 to 2 allow
selection of various functions by changing parameter settings. The settings shown in paren-
theses in the Function column for the multi-function inputs and multi-function contact outputs indi-
cate the default settings.
H 3G3HV Series
D Terminal Block Configuration (400-V Class with 3.7-kW Output, CUE Models)
Name
Set by parameter H2-01 (during running).
Set by parameter H2-02 (zero speed
detection).
Set by parameter H2-03 (agree output ref-
erence detection).
When fault occurs:
Terminals 18 to 20: Closed
Terminals 19 to 20: Open
Set by parameter H4-01. (Output frequen-
cy: 0 to ±10 V/±100% frequency)
Set by parameter H4-01. (Output current:
5 V/Inverter rated current)
Common for analog output.
www.dadehpardazan.ir 88594014-15
Function
Chapter 2
Signal level
Contact output
(SPST-NO)
30 VDC, 1 A max.
250 VAC, 1 A max.
Open collector out-
put
48 V, 50 mA max.
Contact output
(SPDT)
30 VDC, 1 A max.
250 VAC, 1 A max.
0 to ±10 VDC, 0 to
10 VDC, 2 mA
max.
Control
circuit
terminals
Main circuit
terminals
2-15