Table of Contents
Advertisement
Installation
2. While pressing the sides of the front cover, pull the front cover towards you.
• Mounting the Front Cover
Mount the front cover to the Inverter by taking in reverse order to the steps to remove the front cover
after wiring the terminals.
Do not mount the front cover with the Digital Operator attached to the front cover, otherwise Digital
Operator may malfunction due to imperfect contact.
Insert the tab of the upper part of the front cover into the groove of the Inverter and press the lower part
of the front cover onto the Inverter until the front cover snaps shut.
www.dadehpardazan.ir 88594014-15
Chapter 2
2-11
Advertisement
Table of Contents
