Table of Contents
Advertisement
Beyond the Basics
Setting Up Your Security System
reviewing your menu options
After you've connected power to your Security Console, the
display shows the time of day on the bottom left line, and "HOME
CONTROL" in the top line.
All features (except Home Control) require access to the Menu
mode. To do this, press either of the Menu / buttons. The display
then shows "ENTER PIN" (Personal Identification Number) in the
top line.
Enter the default PIN (0000). This clears the top line and shows
for each number entered. See page 15 for instructions on how you
can change your PIN. After you enter the PIN, the display shows the
first menu level.
first menu level
To select a menu option, repeatedly press Menu / to scroll
through menu items 1 through 9. Or, you can press number button
1 through 9 on the control panel to go directly to that menu item.
Once you arrive at the menu item you desire, press ok to select it.
1. INSTALL
2. SET CLOCK
3. PHONE NUMS
4. MESSAGE
5. NEW PIN
6. MEMORY CLEAR
7. OPTIONS
8. DELAYS
9. SET TIMER
To leave the first menu level, press clear. If you are entering
numbers (for the time, etc.), the clear button will clear all numbers
entered. Otherwise, clear gives the option of leaving the menu
completely and going back to the "HOME CONTROL" mode, or
staying in the "INSTALL" mode.
Allows installation/removal of sensors, and/
or remotes.
Enter time followed by am or pm.
Store up to six (16 digit) phone numbers.
RECORD (This is your own alarm message)
REPLAY (Replays your message).
Enter new 4 digit PIN.
Clear all Sensors, Remotes, Timers, or
Master Clear.
Set Chime On/Off, Siren On/Off, Set
Housecode or Light Code.
Set Exit, Entry, Dial, and Answer Delays.
Enter unit code, then On and Off time, then
Daily, Once or Random.
6
*
Hide quick links:
Advertisement
Table of Contents
