Radio Shack 49-1000 User Manual page 27

Plug ‘n power wireless security system
Hide thumbs Also See for 49-1000:
Table of Contents

Advertisement

Beyond the Basics
Question
Why won't my lights
turn on or off using the
on or off buttons on my
Keychain Remote?
Why don't I hear a beep
from my Security Console
when I register a Door/
Window Sensor or Motion
Detector.
Answer
Be sure you set the correct
SECURITY LIGHT CODE in your
Security Console, see Setting
Security Console Options on
page 15.
Be sure the light your are trying
to control has its on/off switch
in the on position. And, check to
see that the bulb is good.
Plug your Module into another
outlet near your Security
Console.
Be sure the indicator on your
Keychain Remote lights when
you press a button.
Replace the batteries and
re-register your remote if
necessary.
Check the dials on your
Modules.
The system may already be
registered. Disarm your Security
Console, and check to see if it
chimes when you press test on the
Door/Window Sensor, or the alarm
trips when you press test on a
Motion Detector (when the system is
armed).
If it does, the sensor is already
registered and no further action
is necessary.
If not, re-register the Sensor/
Motion detector (see Registering
Door/Window Sensors and
Registering Motion Detectors on
pages 9 and 11).
27

Advertisement

Table of Contents
loading

Table of Contents