Table of Contents
Advertisement
Beyond the Basics
/
Use Menu
CHIME
SIREN
HOUSECODE
LIGHTCODE
setting delays
Press Menu / and enter your PIN .
When you see "INSTALL" on your Security Console, press
/
Menu
Press ok. You also can press 8 to go directly to the "DELAYS"
menu.
/
Use Menu
ENTRY DELAY
EXIT DELAY
DIAL DELAY
ANSWER DELAY (Default 30 seconds)
Select the desired sub-menu item and then press ok. Then, enter
the desired delay time for up to 99 second and press ok.
setting your timers
Press Menu / and enter your PIN .
When you see "INSTALL" on your Security Console, press
/
Menu
Press ok. You also can press 9 to go directly to the "NEW
TIMER" menu.
"NEW TIMER" displays. If no timers have been entered, Menu
will not function. If other timers are in memory, Menu
around them, and will always include "NEW TIMER" in the loop if
empty space is available in memory.
To enter a new timer, you must be in the "NEW TIMER" menu.
Press ok. "UNIT NUMBER" displays. Enter a valid unit number
(1-16) and press ok.
For example: If you enter 12, the top line of your Security
Console displays "TIMER 12 ON." The bottom line displays
a colon (:).
to choose from the following sub-menu items:
1. CHIME ON
2. CHIME OFF (No chimes when doors/windows
are opened)
1. SIREN ON
2. SIREN OFF (Silent Alarm)
Press the Menu
Press the Menu
until you reach the "DELAYS" menu.
to choose from the following sub-menu items:
(Default 30 seconds)
(Default 60 seconds)
(Default 5 seconds)
until you reach the "SET TIMER" menu.
16
/
buttons to change.
/
buttons to change.
/
/
will cycle
Hide quick links:
Advertisement
Table of Contents
