Samsung ProXpress C401 series User Manual page 85

Message
Door Open
Close it
Error [error number]
Install [color] toner
Error [error number]
Turn off then on
Error [error number]
Call for service
Install TR.
belt unit.
Not compatible
transfer belt
Not Installed
Waste tank
Not proper room
temp. Move set
Output bin Full
Remove paper
Prepare new
Transfer belt
Replace new
Transfer belt
Prepare
Fuser Soon
Replace new
Fuser unit
Meaning
The cover is not securely
latched.
The indicated toner cartridge is
installed improperly, or the
connector is polluted.
The machine unit cannot be
controlled.
The transfer belt is not
installed.
The transfer belt of the
machine is not for your
machine.
The is waste toner container
not installed.
The machine is in a room with
improper room temperature.
The output tray is full.
The life of the transfer belt will
expired soon.
The life of the transfer belt has
expired.
The life of the fuser unit will be
expired soon.
The life of the fuser unit will be
expired.
Suggested solutions
Close the cover until it locks into
place.
Reinstall the Samsung-genuine
toner cartridge two or three times
to confirm it is seated properly. If
the problem persists, please call
for service.
Reboot the power and try the
printing job again. If the problem
persists, please call for service.
Install a Samsung-genuine
transfer belt.
Install the Samsung-genuine part
designed for your machine.
Install a Samsung-genuine waste
toner container.
Move the machine to a room with
proper room temperature.
Remove papers from the output
tray, the machine resumes
printing. If the problem persists,
call for service.
Replace the transfer belt with a
new one. If the problem persists,
please call for service.
Replace the fuser unit with a new
one. If the problem persists,
please call for service.
Understanding display messages | 85