Features - Mitsubishi Melsec-A AJ65SBT User Manual

1 OVERVIEW

1.2 Features

The AJ65SBT-CLB has the following features.
(1) Seamless connection of two networks
(2) Confirmation of communication status of CC-Link/LT remote
(3) Configuration of CC-Link/LT using A, QnA series
(4) Wire saving and easy installation
(5) Compact size
1 - 2
The AJ65SBT-CLB is a bridge module that can connect CC-Link and CC-Link/LT
seamlessly.
Using RX and RY (bit devices), one bridge module can control up to 224 points
(448 points when both inputs and outputs are used).
stations
The data link statuses and I/O errors of CC-Link/LT remote stations can be
confirmed from the PLC CPU of the CC-Link master station.
A CC-Link/LT system can be configured using the MELSEC-A, QnA series via
CC-Link.
The one-touch connectors ensure easy installation by using as the CC-Link side
communication connectors.
The AJ65SBT-CLB has the same size as the AJ65SBTB1-8
I/O module.
(Width 87.0 (3.43) height 49.0 (1.93)
Either of screws or DIN rail can be used to mount the module to a control panel.
MELSEC-A
compact remote
depth 40.0 (1.57) mm (inch))
1
1 - 2