Table of Contents
Advertisement
Troubleshooting
10
Troubleshooting
LED Typhoon PAR Outdoor 12x10, LED Typhoon True PAR 12x10 Outdoor
28
LED outdoor PAR
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not
use ordinary microphone cables.
Never connect the DMX input or output to audio devices such as mixers
or amplifiers.
In the following we list a few common problems that may occur during operation.
We give you some suggestions for easy troubleshooting:
Symptom
The unit does not work, no
light.
No response to the DMX
controller.
If the procedures recommended above do not succeed, please contact our Service
Center. You can find the contact information at www.thomann.de.
Remedy
Check the mains connection and the fuse.
1. Check the DMX ports and cables for proper con-
nection.
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or along-
side to high voltage cables that may cause damage
or interference to DMX interface circuits.
Advertisement
Table of Contents
